Test conditions
Tester: 80-239-142-217.customer.teliacarrier.com (80.239.142.217) [?]
Target: static240-156.mimer.net (213.161.240.156) [?]
Logfile base name: static240-156.mimer.net:2012-02-22-18:29:19 [?]
This report is based on a 10 Mb/s target application data rate [?]
Warning: The section RTT is greater than the requested target RTT (43 > 20) [?]
This report is based on a 44 ms Round-Trip-Time (RTT) to the target application [?]
Original target RTT was: 20 ms. [?]
The Round Trip Time for this path section is 43.000000 ms.
The Maximum Segment Size for this path section is 1460 Bytes. [?]
The Maximum Segment Size for this path section is 1460 Bytes. [?]
Target host TCP configuration test: Warning! [?]
Warning: TCP connection is not using RFC1323 timestamps. [?]
Diagnosis: The target (client) is not properly configured. [?]
Warnings reflect problems that might not affect target end-to-end performance. [?]
>
See TCP tuning instructions at
http://www.psc.edu/networking/projects/tcptune/ [?]
Path measurements [?]
The data connection was terminated before collecting sufficient data to measure
the path.
Tester validation: Pass! [?]
No internal tester problems were detected.
Tester version: $Id: pathdiag.py,v 1.47 2009/06/10 21:19:57 mathis Exp $
![[Data_Rate_gnuplot]](./static240-156.mimer.net:2012-02-22-18:29:19rate.png)
![[RTT_gnuplot]](./static240-156.mimer.net:2012-02-22-18:29:19rtt.png)
![[Loss_Rate_gnuplot]](./static240-156.mimer.net:2012-02-22-18:29:19loss.png)
![[power_gnuplot]](./static240-156.mimer.net:2012-02-22-18:29:19pow.png)